Yonkers Signature Drywall removes dated popcorn and acoustic ceiling texture and replaces it with a clean, smooth finish. Popcorn ceilings collect dust, yellow with age, and instantly date a room, but scraping them is messy work that most homeowners regret trying on their own. We mask the space completely, scrape the texture down to the gypsum board, then repair, skim, and sand the ceiling flat before priming. When we leave, the room feels taller, brighter, and finished.
Unpainted acoustic texture softens with a light mist of water, which lets us scrape it off in sheets rather than sanding it into airborne dust. We dampen the ceiling in sections, let the popcorn absorb, then draw it down with wide scrapers into contained drop sheets. This keeps the mess low and protects the paper face of the gypsum board underneath.
Scraping alone leaves gouges, exposed joints, and old nail pops, so a bare scraped ceiling is never truly done. We re-tape any lifted seams, reset popped fasteners, and float the whole ceiling with joint compound to a smooth Level 4 or Level 5 finish. That skim step is the difference between a ceiling that looks resurfaced and one that looks patched.
Texture that has been painted will not absorb water and usually has to be skimmed over rather than wet-scraped. Popcorn ceilings installed before the mid-1980s can also contain asbestos, so we recommend testing older Yonkers and Westchester homes before any removal begins. If a test comes back positive, we coordinate proper abatement rather than disturbing the material.
We seal doorways with plastic, cover floors and fixtures, and run the job so the rest of your home stays livable. Because we favor wet-scraping and vacuum-assisted sanding, we keep fine gypsum dust from migrating through the house. The space is left broom-clean and primed, ready for your finish color.
From Yonkers, NY out to Dobbs Ferry, Hastings-on-Hudson, Ardsley, Hartsdale, and Scarsdale, we handle dust-controlled popcorn ceiling removal and acoustic texture scraping.